LT210 Washing Station

The LT210 Washing Station accepts manually loaded DropArray Microplates into a liquid-tight chamber formed with a clamping mechanism. After an aqueous washing buffer is automatically added, the station gently shakes the microplate to facilitate washing with minimal loss of cells. The station then tilts the microplate, using gravity to drain excess washing buffer from the planar surface, avoiding the harsh, high-velocity liquid exchange associated with traditional washers and microplates. Buffer is added at a very low velocity, preventing cell and bead loss. In addition, there is a magnet array embedded in the plate holder for Luminex® assays. This helps retain magnetic beads on the microplate upon washing. Despite the low velocity, plate processing time is comparable to traditional washers because the entire plate is treated at once. After the microplate is removed from the station the plate is ready for accepting the next set of reagents.

LT210 Washing Station

LT210 Washing Station. Convenient aqueous buffer washing for DropArray Microplates.

DropArray LT210 Washing Station MX   P/N LT-210MX-01-01
Dimensions   38 cm (15”) x 25 cm (10”) x
33 cm (13”), 8 kg (18 lb)
96 format LT magnet clamper   P/N LT-CP-MAG-96-01
384 format LT magnet clamper   P/N LT-CP-MAG-384-01

Luminex is a either a trademark or registered trademark of Luminex Corporation in the US and/or other countries. Curiox DA-Bead plates are not endorsed by the Luminex Corporation.